Probably is not the cause but hard not to notice the big ding in the
cardboard at about the right spot to cause your "deflection" from just
the right whack with the fork lift. Did it affect all the mods?
Bill
Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net
On 11/16/2019 7:12 AM, Kristopher Schmid wrote:
So, I opened up a pallet of Jinko 400 watt half cell modules yesterday
and noticed that every module was convex to the glass side. The
center was 1/4 inch higher than the corners. Has anyone else seen
this? Should I be concerned? Manufacturing issue? Intentional?
Thanks,
Kris
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
--
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
