I've noticed this is worse with multiple bulbs in one fixture, and it is
even slightly noticeable on grid power, but worse on inverter power. I
first saw this with CFL's also, but not as bad as with the LED's. And this
is without any motor loads going. It's not consistent either, sometimes it
does it and sometimes not. Fortunately, when it's annoying we have the
option of going onto grid power. If we were on inverter power all the time
I'd be looking for some way to fix it also. It does not seem to matter what
inverter it is either, I've tried four different brands and they all seem
about the same.

Brad

On Sat, Sep 21, 2019 at 1:06 PM Ray <r...@solarray.com> wrote:

> No error codes, just light flickering with the washing action.  Its a
> Magnum MS 4448 PAE, 48 v 845 AH of HUP batteries, 2/0 cables.  Happens day
> or night.  Also the lights are not on a dimmer, just a regular switch.  It
> happens to the LEDs all over the house.  They are the Econolight brand from
> Home Depot.  Feit brand have less flicker, but are still not acceptable.
>
> We're thinking the distortion of the waveform by the washer is creating
> harmonic distortion that the LEDs are responding to.  Still hoping
> filtering or different bulbs will fix the issue.
>
> Ray Walters
> Remote Solar
> 303 505-8760
>
> On 9/21/19 1:24 PM, Jerry Shafer wrote:
>
> Ray
> A few questions, do you see a code, what size is the inverter, batteries,
> cables, day or night operation.
> Jerry
>
> On Sat, Sep 21, 2019, 11:45 AM Ray <r...@solarray.com> wrote:
>
>> Greetings Esteemed Wrenches;
>>
>> We have a customer with a new high efficiency washer running on a Magnum
>> inverter.  When it is in wash cycle, the LED lights flicker rhythmically
>> with its operation.  We can see a corresponding distortion of the wave
>> form on an oscilloscope, but RMS voltage is steady at 117 vac.  It does
>> not cause trouble with incandescent lighting, and the washer works fine.
>>
>> My questions:
>>
>> 1) Has anyone else seen washing machines causing trouble with lighting
>> or other loads?
>>
>> 2) Is there any line filtering available that might cure this?
>>
>> 3)  Are some LED lights more prone to issues?    We are considering
>> having the customer switch from the Home Depot cheapo LEDs to Phillips
>> or other higher end bulbs.
>>
>> 4) Could it be related to the bulbs being dimmable?  Should we be using
>> non-dimmable bulbs?
>>
>> As always thanks in advance for your invaluable input and comments.
>>
>>
>> --
>> Ray Walters
>> Remote Solar
>> 303 505-8760
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches@lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive:
>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>>
>>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & 
> settings:http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: 
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:www.members.re-wrenches.org
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to