Re: [RE-wrenches] SW fault code low output voltage

[bruce]

Customer designed/installed system to power domestic well pump. Seemed to work well for over a year. Unknown hp, but probably 3/4 or 1. Maybe starting current pulls voltage down below fault level? But now inverter will reset, but go immediately back to fault with no load. Fortunately he has a grid backup/transfer switch!

Bruce Fiero

 

-------- Original Message --------
Subject: Re: [RE-wrenches] SW fault code low output voltage
From: Mac Lewis <maclew...@gmail.com>
Date: Thu, August 22, 2019 6:28 pm
To: RE-wrenches <re-wrenches@lists.re-wrenches.org>

What kind of load is on this system?  Any oddball loads that may strange power factor?

On Thu, Aug 22, 2019 at 7:15 PM <br...@willpowerelect.com> wrote:

Group,

I'm not very familiar with Schneider equipment, but would like to understand fault code 00F1 on a CSW 4024.

Low voltage output. Any remedy? Have reset several times but fault continues. Inverter only two years old.

Tech support wouldn't take my call 'cause I'm not on their 'certified' list.

Thanks!

Bruce Fiero

P: 541.535.3965
F: 541.512.0061
E: br...@willpowerelect.com
W: Willpower Electric, LLC 

CCB 191852
Oregon Electrical Contractor C681
NABCEP Certified Solar (PV) Installer 031409-38

DUNS 191470363 

Energy Trust of Oregon Trade Ally Solar (PV) Installation & Energy Efficient Commercial Lighting Programs  

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

--

Mac Lewis

"Yo solo sé que no sé nada." -Sócrates

---

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org