Hi Jeff,
I am not going to guess if this will work, it should. I use XW's because they start anything I have come across. If you do this, make sure but SW's have the latest and same firmware. There were problems with stacked SW's early on in their development. Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgridsolar/ [1] e-mail offgridso...@sti.net [2] text 209 813 0060 On Mon, 22 Jul 2019 07:26:07 -0700, Jeff Clearwater wrote: Hey Esteemed Wrenches, So I recently built a power trailer with a single 4 KW (4048) Schneider SW for a client with a moderate cabin lifestyle. But he lives on a high hill and even though his 2 HP Macerator is only rated at 15 amps continuous that baby starts up with a whopping kick - probably close to or at it's 53 Amps Locked Rotor rating. The SW has the following surge capability: SW 4048 Rated @ 240 Volts: Continuous - 15.2 Amps 3700 Watts 30 Minutes - 18.3 Amps 4400 Watts 5 Secs - 29.2 Amps 7000 Watts Max (100ms?) - 41 Amps - 9840 Watts Can I be confidant that 2 stacked SWs will start this baby? Any experience with similar macerators - or simply educated guesses? Thanks! Jeff -- Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgridsolar/ [3] e-mail offgridso...@sti.net [4] text 209 813 0060 Links: ------ [1] http://members.sti.net/offgridsolar/ [2] mailto:offgridso...@sti.net [3] http://members.sti.net/offgridsolar/ [4] mailto:offgridso...@sti.net
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
