About 3 years ago i installed a single Magnum 4024 on a 1.5 Hp hydrolic pump, the DC surge was 275 amps, i was impressed, as far as i know the system is still functioning today. It is used only a few times a month. I measured with peak hold on Greenly clamp amp meter.
On Mon, Jul 22, 2019, 9:26 AM Jeff Clearwater <je...@villagepowerdesign.com> wrote: > Hey Esteemed Wrenches, > > So I recently built a power trailer with a single 4 KW (4048) Schneider SW > for a client with a moderate cabin lifestyle. > > But he lives on a high hill and even though his 2 HP Macerator is only > rated at 15 amps continuous that baby starts up with a whopping kick - > probably close to or at it's 53 Amps Locked Rotor rating. > > The SW has the following surge capability: > > SW 4048 Rated @ 240 Volts: > Continuous - 15.2 Amps 3700 Watts > 30 Minutes - 18.3 Amps 4400 Watts > 5 Secs - 29.2 Amps 7000 Watts > Max (100ms?) - 41 Amps - 9840 Watts > > Can I be confidant that 2 stacked SWs will start this baby? > > Any experience with similar macerators - or simply educated guesses? > > Thanks! > > Jeff > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
