Only thing I see is you will have to have 2 Envoys. The IQ inverters send the data on the powered conductors, not on the neutral like the M250¹s.
Chad Waits President/Owner Net Zero Solar 101 W. 5th St., Tucson, AZ 85705 Office: 520-207-4053 Cell: 520-270-4873 NABCEP Certified PV Installation Professional From: RE-wrenches <re-wrenches-boun...@lists.re-wrenches.org> on behalf of Jason Szumlanski <ja...@floridasolardesigngroup.com> Reply-To: RE-wrenches <re-wrenches@lists.re-wrenches.org> Date: Thursday, June 6, 2019 at 8:42 AM To: RE-wrenches <re-wrenches@lists.re-wrenches.org> Subject: [RE-wrenches] Enphase IQ combiner for M series microinverters Does anyone see anything wrong with using an Enphase IQ combiner to combine two strings of IQ microinverters with two strings of M250 microinverters? I would not use the production CT (just use microinverter production data). I can't see any technical reason this can't be done. Do any listing or code reasons come to mind? Jason Szumlanski Florida Solar Design Group _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
