| Well, perhaps I was on track anyway….you can use the same method (flip every other battery) if you are using a battery with 2 terminals per pole (like Lifeline). Larry Crutcher Starlight Solar Power Systems |
Fullriver DC1150-2 wiring.pdf
Description: Adobe PDF document
On Apr 30, 2019, at 12:57 PM, Starlight Solar Power Systems <la...@starlightsolar.com> wrote: Sorry Drake, I should read better…you said Concorde. Larry On Apr 30, 2019, at 12:42 PM, Starlight Solar Power Systems <la...@starlightsolar.com> wrote: Hi Drake, <untitled.pdf>The way I wire them is to place them side by side and flip every other battery 180°. Then you can use a interconnect cable without tight bends. I attached a diagram as it is easier to see than to describe. Larry Crutcher Starlight Solar Power Systems On Apr 30, 2019, at 9:26 AM, Drake <drake.chamber...@redwoodalliance.org> wrote:
Hello Wrenches, I am wiring a set of 2 V Concorde batteries for 48 V. Each battery has 2 terminals which will be about 2 1/2 inches away from the terminals they will be wired to. Standard battery jumpers would be ridiculous in this situation. Busbars would be clean and efficient. Concorde doesn't have a solution. Does anyone know of a source for busbars? Thank you, Drake Drake Chamberlin Athens Electric LLC OH License 44810 CO License 3773 NABCEP Certified Solar PV 740-448-7328 http://athens-electric.com/ |
_______________________________________________ List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
