Many I have spoken with will order these thru Storm Power Componets, you just have to have the measurements, so they can make them up.
On Tue, Apr 30, 2019, 3:44 PM Starlight Solar Power Systems < la...@starlightsolar.com> wrote: > Hi Drake, > > The way I wire them is to place them side by side and flip every other > battery 180°. Then you can use a interconnect cable without tight bends. I > attached a diagram as it is easier to see than to describe. > > Larry Crutcher > Starlight Solar Power Systems > > > > > > On Apr 30, 2019, at 9:26 AM, Drake <drake.chamber...@redwoodalliance.org> > wrote: > > Hello Wrenches, > > I am wiring a set of 2 V Concorde batteries for 48 V. Each battery has 2 > terminals which will be about 2 1/2 inches away from the terminals they > will be wired to. Standard battery jumpers would be ridiculous in this > situation. Busbars would be clean and efficient. Concorde doesn't have a > solution. > > Does anyone know of a source for busbars? > > Thank you, > > Drake > > Drake Chamberlin > > > > > > *Athens Electric LLC OH License 44810 CO License 3773 NABCEP Certified > Solar PV 740-448-7328 *http://athens-electric.com/ > > > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
