Have you looked at the Lumos system? They are not cheap, but look nice, and would work well in this application. The rail has integrated wire management.
https://lumossolar.com/ Sunny regards, Garrison Riegel Rethink Electric On Thu, Feb 7, 2019 at 8:06 AM Jason Szumlanski < ja...@floridasolardesigngroup.com> wrote: > Hi all, > > I'm looking for some ideas for attaching modules to a curved carport > system. I attached a concept drawing. I'm pretty dead-set on through > bolting to the frames, but bottom clips would probably work if using an > off-the-shelf rail system. Any products or picture you can supply would be > very helpful. > > The uprights pictured are already determined. It's a 20' radius curve. I'm > assuming it will be steel tube bent to that radius. The total length will > be much longer than what is pictured. The general contractor is willing to > entertain any welded or bolted solution for the structure. > > Thanks! > > Jason Szumlanski > Florida Solar Design Group > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
