Hi all, I'm looking for some ideas for attaching modules to a curved carport system. I attached a concept drawing. I'm pretty dead-set on through bolting to the frames, but bottom clips would probably work if using an off-the-shelf rail system. Any products or picture you can supply would be very helpful.
The uprights pictured are already determined. It's a 20' radius curve. I'm assuming it will be steel tube bent to that radius. The total length will be much longer than what is pictured. The general contractor is willing to entertain any welded or bolted solution for the structure. Thanks! Jason Szumlanski Florida Solar Design Group
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
