A very common way around rapid shutdown for off-grid systems especially
with ground or pole mounts is using a "power shed" for the BOS
components.....if it is not inhabited / uninhabitable then rapid shutdown
is not needed per NEC 2017.

Dan Fink
Former Professor of Solar Energy Technology, Ecotech Institute
IREC Certified Instructor™ for:
~ PV Installation Professional
~ Small Wind Installer
Executive Director, Buckville Energy
NABCEP Registered Continuing Education Providers™
NABCEP PV Associate

970.672.4342




On Sat, Feb 2, 2019 at 1:40 PM Kienan Maxfield <maxfieldso...@hotmail.com>
wrote:

> Jay,
>
> I'm interested in this too, but I don't have any good answers (I was
> hoping that someone else would have responded by now). I know that this
> doesn't answer the question... but my only comment is to use a pole mount
> whenever possible. Rapid shutdown only applies to systems on a building or
> where the PV system conductors penetrate beyond 3' into a building before
> reaching the PV system disconnect. For a pole mount, as long as your
> equipment is on the outside wall, you can easily get to the PV system
> disconnect within 3' of wire length from the building penetration so no
> rapid shutdown of any kind is required. The battery system is considered a
> separate system in the 2017 code and there is no requirement for rapid
> shutdown of any kind in that system.
>
> Thanks,
> Kienan
>
>
> *Maxfield Solar*
> *maxfieldso...@hotmail.com* <maxfieldso...@hotmail.com>
> * (801) 477-0-SUN (477-0786) (801) 631-5584 (Cell) *
> ------------------------------
> *From:* RE-wrenches <re-wrenches-boun...@lists.re-wrenches.org> on behalf
> of jay <jay.pe...@gmail.com>
> *Sent:* Wednesday, January 30, 2019 6:02 PM
> *To:* RE-wrenches
> *Subject:* [RE-wrenches] module level control for offgrid
>
> HI All,
>
> Well its the new year and Module level control is here. 690.12 (B)(2)
>
> Does anyone have any updates as to products that work with CC's that meet
> it?
>
> Thx
> jay
>
> Peltz Power
>
>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
>
> https://apc01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.re-wrenches.org%2Foptions.cgi%2Fre-wrenches-re-wrenches.org&amp;data=02%7C01%7C%7C5056c4841d184b864da108d6873edd73%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636845101401678181&amp;sdata=ncjKwCiy%2BQbo0lqP7srSc8G9CryOtNQPjfhAKitodfc%3D&amp;reserved=0
>
> List-Archive:
> https://apc01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.mail-archive.com%2Fre-wrenches%40lists.re-wrenches.org%2Fmaillist.html&amp;data=02%7C01%7C%7C5056c4841d184b864da108d6873edd73%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636845101401688186&amp;sdata=%2FZtDovZYOzIZrFwiwKDR2XqoZ2eXWvor6guHCz59j0c%3D&amp;reserved=0
>
> List rules & etiquette:
>
> https://apc01.safelinks.protection.outlook.com/?url=www.re-wrenches.org%2Fetiquette.htm&amp;data=02%7C01%7C%7C5056c4841d184b864da108d6873edd73%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636845101401688186&amp;sdata=sAk7k9sjTPsWc3wrtceu%2FHzgH%2BN97FtdD2HHG55KU0E%3D&amp;reserved=0
>
> Check out or update participant bios:
>
> https://apc01.safelinks.protection.outlook.com/?url=www.members.re-wrenches.org&amp;data=02%7C01%7C%7C5056c4841d184b864da108d6873edd73%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636845101401688186&amp;sdata=H5sD9UsXdk2dIZsOTsQdQLRWWPXKO1joqt3GQqLOuIA%3D&amp;reserved=0
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to