Wrenches Blue ion and there BMU can control a relay as a dump or anything else, their BMU is far ahead of most. You will need to contact Blue Ion to get this set up but once its configured your in great shape. In the Outback program you can use the voltage preset as a dump but because of the very flat line between 20% and 80% it does take a little more to get set but because of their BMU the batteries are protected against over voltage. To set the "sell" I have found much the same in setting up in the Outback programming using voltage it just takes some time. It would be nice to let the BMU tell the inverters when to sell, maybe someday. Jerry
On Mon, Dec 10, 2018, 12:33 PM Ray <r...@solarray.com wrote: > I would think the standard diversion controller setup would work, but > not sure. I've been hoping that the Li+ manufacturers would add a relay > control to their BMS. Basically when the battery thinks its charged it > just turns on the dump load. I don't think the Li+ folks are near that > far along yet. > > Ray Walters > Remote Solar > 303 505-8760 > > On 12/10/18 1:15 PM, frenergy wrote: > > How or can a Harris DC microhydro (<.6 KW) work with existing PV > > charged Outback FP2 (or Radian for that matter), whilst charging a > > ~16KW L-ion "24" volt battery ? I think that's a real word. The > > output of the hydro varies over time from .6KW to .1KW > > > > Bill > > > > Feather River Solar Electric > > Bill Battagin, Owner > > 4291 Nelson St. > > Taylorsville, CA 95983 > > 530.284.7849 > > CA Lic 874049 > > www.frenergy.net > > > > > > --- > > This email has been checked for viruses by Avast antivirus software. > > https://www.avast.com/antivirus > > > > > > _______________________________________________ > > List sponsored by Redwood Alliance > > > > List Address: RE-wrenches@lists.re-wrenches.org > > > > Change listserver email address & settings: > > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > > > List-Archive: > > > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > > > List rules & etiquette: > > www.re-wrenches.org/etiquette.htm > > > > Check out or update participant bios: > > www.members.re-wrenches.org > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
