I would think the standard diversion controller setup would work, but
not sure. I've been hoping that the Li+ manufacturers would add a relay
control to their BMS. Basically when the battery thinks its charged it
just turns on the dump load. I don't think the Li+ folks are near that
far along yet.
Ray Walters
Remote Solar
303 505-8760
On 12/10/18 1:15 PM, frenergy wrote:
How or can a Harris DC microhydro (<.6 KW) work with existing PV
charged Outback FP2 (or Radian for that matter), whilst charging a
~16KW L-ion "24" volt battery ? I think that's a real word. The
output of the hydro varies over time from .6KW to .1KW
Bill
Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
