Hi Howie Yes you need a Mate 3 to program and view data for the FM100
Jay Peltz power. > On Aug 14, 2018, at 5:48 PM, Howie Michaelson <howie.michael...@gmail.com> > wrote: > > I am changing out an off-grid AC coupled SMA SB3000TL inverter tied to a dual > stack VFX3648 system with a Mate (original - not Mate3) and an FNDC, making > into a DC coupled array. It was set up as AC coupled originally because of > the distance the array was from the system (about 500 feet) and high > voltagecharge controllers were not available at the time. Now that there are > several options, we want to change it because the charging setup is less than > adequate. My first choice is to use an Outback FM100, only because it keeps > all the equipment tied together, although I'm not a big fan of Outback these > days. What are folks experience with the FM100? And apparently it needs a > Mate3 (not the Mate) in order to program and read it, true? Otherwise I will > probably go with either a Midnite 250 SL or a Schneider XW80-600. > TIA, > Howie Michaelson > Sun Catcher > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
