My record is 1500 feet with the mppt-80-600v. I don't have a generator so
I am a bit different:) the pix is working again!
Dave Angelini Offgrid Solar
"we go where powerlines don't"
http://members.sti.net/offgridsolar/
e-mail offgridso...@sti.net
text 209 813 0060
> We have had two in the field for two years with noproblems. They
> allowed us to run 375feet with conductors that was substantially smaller
> than what would have otherwise been possible. Chris
>
>
> On 1/18/2018 12:34 PM, Mac Lewis wrote:
>> I'll vouch for Schneider's 600A charge controller as well. We don't
>> have as many as Dave has out there but no failures. Seems to be a
>> solid device. Works well with the PDP too.
>>
>> Good Luck!
>>
>> On Thu, Jan 18, 2018 at 10:15 AM, Howie Michaelson
>> <howie.michael...@gmail.com <mailto:howie.michael...@gmail.com>> wrote:
>>
>> Boy, that would be a bonus! I like sticking with products that
>> have worked for me, although I am intrigued by the XW 600vDC.
>>
>> Any word on the release date for Midnite's inverter?
>>
>> On Thu, Jan 18, 2018 at 11:51 AM, <penobscotso...@midmaine.com
>> <mailto:penobscotso...@midmaine.com>> wrote:
>>
>> FYI Howie,
>> Â Â Schneider engineers are actively working on a communication
>> solutions
>> between the Schneider Xanbus and Midnite controllers. I've
>> been talking
>> to an engineer working on it who says it should be ready very
>> soon. It
>> will also work with the combox for remote monitoring.
>>
>> Daryl
>>
>>
>> > Hi All,
>> > Anyone have feedback/review of the 600 volt Schneider Charge
>> Controller
>> > that they'd care to share? I have an existing Conext XW+
>> off-grid system
>> > with combox communication setup which currently has about
>> 1.5 kW of solar
>> > feeding through 2 MX60s (no hub). We'll be adding about 5kW
>> (on a TPM
>> > about
>> > 150' away) and I'm trying to decide if overall it would be
>> better to use
>> > the Schneider 600v (which I haven't used before, although I
>> have serviced
>> > the 150v XW with no real complaints). Typically I would use
>> a Classic200,
>> > but given the ability to integrate with the XW6848 and
>> communicate through
>> > the Combox for more offsite visibility, I'm considering the
>> Schneider, but
>> > only if it's not going to provide me with the benefit of
>> added service
>> > calls.
>> > TIA!
>> > Howie
>> > _______________________________________________
>> > List sponsored by Redwood Alliance
>> >
>> > List Address: RE-wrenches@lists.re-wrenches.org
>> <mailto:RE-wrenches@lists.re-wrenches.org>
>> >
>> > Change listserver email address & settings:
>> >
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>
>> >
>> > List-Archive:
>> >
>>
>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>
>> <http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html>
>> >
>> > List rules & etiquette:
>> > www.re-wrenches.org/etiquette.htm
>> <http://www.re-wrenches.org/etiquette.htm>
>> >
>> > Check out or update participant bios:
>> > www.members.re-wrenches.org
>> <http://www.members.re-wrenches.org>
>> >
>> >
>>
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches@lists.re-wrenches.org
>> <mailto:RE-wrenches@lists.re-wrenches.org>
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>
>>
>> List-Archive:
>>
>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>
>> <http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html>
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> <http://www.re-wrenches.org/etiquette.htm>
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org <http://www.members.re-wrenches.org>
>>
>>
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches@lists.re-wrenches.org
>> <mailto:RE-wrenches@lists.re-wrenches.org>
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>
>>
>> List-Archive:
>>
>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>
>> <http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html>
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> <http://www.re-wrenches.org/etiquette.htm>
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org <http://www.members.re-wrenches.org>
>>
>>
>>
>>
>>
>> --
>>
>>
>>
>> Mac Lewis
>>
>> *
>>
>> "Yo solo sé que no sé nada." -Sócrates
>>
>> *
>>
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches@lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive:
>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>>
>
> --
> Christopher Warfel, PE
> Entech Engineering, Inc.
> 401-466-8978
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
Dave Angelini Offgrid Solar
"we go where powerlines don't"
http://members.sti.net/offgridsolar/
e-mail offgridso...@sti.net
text 209 813 0060
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
