Ray: After you find clips that make you happy, order more of them to mount your preferred raceway to the roof and dress your leads in it. We like strut with closure strips.
You may have clearance issues fitting raceway if the panels are too close to the roof. You could remedy that by using rail. With the right rail, you need little in the way of raceway. We just closed the logic loop. Your welcome. William > On Jan 10, 2018, at 9:18 PM, Ray <r...@solarray.com> wrote: > > Hi All; > > I was wondering what folks were doing these days for wire management on > Standing seam roofs with the S5! clamps and no rails. I'm at a loss (once > again) for how to secure the home runs without a rail. I have some of those > module edge clips, but those only hold one wire, and I've had them slip off > (wire dangling visible from ground.) > Also most suppliers seem to only carry the universal S5! clamps, but I have > found those to really bend up the metal on certain types of standing seam > roofs. I wanted to order the recommended model for the particular roof. AEE > quit carrying S5 altogether. > Give me your Standing seam wisdom. > > Thanks, > > Ray Walters > Remote Solar > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
