Hi All;
I was wondering what folks were doing these days for wire management on
Standing seam roofs with the S5! clamps and no rails. I'm at a loss
(once again) for how to secure the home runs without a rail. I have
some of those module edge clips, but those only hold one wire, and I've
had them slip off (wire dangling visible from ground.)
Also most suppliers seem to only carry the universal S5! clamps, but I
have found those to really bend up the metal on certain types of
standing seam roofs. I wanted to order the recommended model for the
particular roof. AEE quit carrying S5 altogether.
Give me your Standing seam wisdom.
Thanks,
Ray Walters
Remote Solar
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
