HI Tom, I think maybe the best way to think about these batteries is that they are really like a standard LA battery. There is no communication, all BMS is internal to the battery. If you want more capacity they parallel, but no communication between batteries. All battery wires are to be same length. They will work with any CC/inverter set up. Super easy to do. CC/charger programing is easy and most every charger with programable set points should work as best I can tell. Manual comes with set point/charge/discharge info.
The one I’ve worked on is working as expected. A very easy set up compared to all the other ones I’ve seen. No fans/computers so can be installed in a non clean environment. I would use them again. jay peltz power > On Aug 4, 2017, at 12:04 PM, Tom Lane <t...@ecs-solar.com> wrote: > > Does anyone know about or have experience with SimpliPhi Piwer PHi3.4 Snart > -Tech Batteries or similar batteries with SMA , Schneider, Outback , etc > charge controllers and Residential or Commercial Systems. GatorTom > t...@ecs-solar.com <mailto:t...@ecs-solar.com> or answer at re-wrenches > Please thank you for any educational information before I use these batteries > or is there a better choice. Thanks Again
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
