I use "fir tree" zip ties that will pop into the ground holes in the frame.
On May 24, 2017 8:11 AM, "Dana" <d...@solarwork.com> wrote: > I am installing SolarWorld 285 w modules for our new home on Array > Technologies dual axis trackers [we are in a canyon]. > > The side rails of the frames are typical with a flange however the short > end frame is this little kind of “I” beam that does not allow for any wire > clips. > > I am wondering what other folks have done in this situation, short of > drilling the module frame? > > SnapnRack has a ¾” thick clamp that creates a 7/8” min gap between the > module columns that is rather unsightly. > > Suggestions? > > > > ------------------------------------------------------------ > ---------------- > > Dana Orzel Great Solar Works, Inc. > > *208.721.7003 <(208)%20721-7003> d...@solarwork.com > <d...@solarwork.com>* > > Idaho Contractor - # 028765 Idaho PV # 028374 > > NABCEP # 051112-136 www.solarwork.biz > > *"Responsible Technologies for Responsible People since 1988" * > > *P* Please consider the environment before printing this email. > > > > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches. > org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
