I would think that Solar City would know all about this.

Or, maybe I wouldn't ?

boB



On 6/29/2015 11:06 AM, Rebekah Hren wrote:
I don't have any info, but the StorEdge diagram is confusing to me when it says "energy independence." I can see a simple compatibility between the Powerwall DC voltage (300 to 400VDC) and the SolarEdge operating voltage, ~350VDC, and I can also see how this setup could be used to maximize self-consumption (a grid-zero type system).

What is confusing is the AC output of the inverter - it is not diagrammed as a multimode system, which is what "energy independence" would indicate to me. The brochure is not showing an AC loads panel that can be isolated from the grid, or any kind of separate transfer switch - which would be necessary for a multimode system. I would be curious to hear what the technical requirements will be to install the system as a multimode system, if that is indeed a possibility - which it may not be.


Rebekah

On Mon, Jun 29, 2015 at 8:57 AM, Kirk Herander <k...@vtsolar.com <mailto:k...@vtsolar.com>> wrote:

    Hello,

    Anyone have detailed info on the Storedge battery-compatible
    system from Solaredge? I only found a brochure on their website.
    Apparently batteries can be added to a new or existing Solaredge
    inverter (the brochure says they have partnered with Tesla’s
    Powerwall) for backup power. They call it “DC-coupling”.

    *Kirk Herander*

    *VT Solar, LLC *

    */Proven PV provider since 1991/*

    *www.vermontsolarnow.com <http://www.vermontsolarnow.com>*

    dba Vermont Solar Engineering

    NABCEP^TM Inaugural Certificant

    VT RE Incentive Program Partner

    802.863.1202



_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to