HI All, You can buy those exact products from Derik at hipowerhydro.com
He has made a number of upgrades to reduce the bad connection problems and therefor increase life. jay On Sat, Jun 13, 2015 at 8:00 AM, Bob Maynard <gpgrid...@gmail.com> wrote: > Alternative Power and Machine makes a decent built diversion load. > http://apmhydro.com/products/ > > Bob Maynard > > On Fri, Jun 12, 2015 at 10:02 PM, Dan Fink <danbo...@gmail.com> wrote: > >> Hi Kevin; >> I agree those dump loads were marginal as far as construction and >> capacity. I believe the actual manufacturer was Missouri Wind and Sun, the >> HL-75/100 units still show on video on their site. The riveted connections >> to the resistor lugs were not good, and backside heat problems as you >> mention, and serious expansion and contraction issues. Now they just sell >> the resistors, no enclosure. There is a need for a sturdy and reliable >> product here. Unfortunately getting a UL listing is so expensive.....but >> that may not be an issue for you out back of beyond Smithers, I know and >> love the area! >> The usual DC replacement water heater elements available everywhere have >> always worked fine for me. Another need for a product is one that also >> > > > -- Jay Peltz Peltz Power jay.pe...@gmail.com
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
