Bill: The other image is a garden variety landscape flag. Bend a 45 in the lower end and stick it through your pilot hole. Spin it and when the end touches the side of a rafter you will know exactly where the rafter is.
Circle your pilot hole with a lumber crayon so you don't forget to patch it. Hopefully the pilot hole will lie under your flashing. If you do need to go into the attic for blocking, roll up the flag and stick that end through the hole. It will unfurl in the attic making it easy to find your location. William > On May 10, 2015, at 5:14 PM, frenergy <frene...@psln.com> wrote: > > I wasn't going to say anything but I have to now say "right-on". I only saw > one image (hammer) in your email, William, so maybe the other image is the > other high-tech tool we use...a fist. > > If its one comp roof layer, this method is very accurate, maybe > because I've used it so many times over the 35+ years I've worked on roofs > and developed "the touch". If you have more than one layer of comp it gets > more and more difficult to pin point the buggers. And yes, Mark, flat roofs > are a real challenge. > > It would still be nice to hear from someone who has found the scanner > that works on the difficult-to-find -rafter roofs. > > Bill > Feather River Solar Electric > > > ----- Original Message ----- > From: will...@millersolar.com > To: 'RE-wrenches' > Sent: Sunday, May 10, 2015 11:16 AM > Subject: Re: [RE-wrenches] Milwaukee Sub Scanner versus Bosch D-Tect > versusothers? > > Friends: > > Below are images of the high-tech rafter detectors we use. > > > > > If you need directions, contact me off list. > > William > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
