Hello Wrenches I am in the initial planning stage of a 150kw roof mount installation. It’s new construction and the architect for this commercial agricultural building is strongly considering a steel (manufacture is Legacy) and fabric building.
Any insights or experiences with steel & fabric buildings? Any recommendations for attachment methods or product manufacturers? Thanks Rich From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of d...@foxfire-energy.com Sent: Thursday, February 12, 2015 7:07 PM To: RE-wrenches Subject: Re: [RE-wrenches] Outback AGS & eq Seems I was once told that (Depending on software revision), successful Switching from Manual to Auto depended on whether or not the system itself called for a start to begin with i.e. whether the start criteria was met in either AGS or a charge mode when the genny was started in manual. My problem was the customer just wanted to run the genset periodically to top off the batteries.. He would start the genny in manual (from the mate 2), and as soon as he kicked it into auto, the genny would shut down. As i recall, we found the smoking gun under timers.. If a clock was still running (Or stopped short) you could switch to auto and it would run out the clock. But if the timers were satisfied, AGS would shut down the genny. Good Luck db Dan Brown Foxfire Energy Corp. Renewable Energy Systems (802)-483-2564 www.Foxfire-Energy.com NABCEP #092907-44 -------- Original Message -------- Subject: Re: [RE-wrenches] Outback AGS & eq From: William Miller <will...@millersolar.com> Date: Thu, February 12, 2015 6:27 pm To: RE-wrenches <re-wrenches@lists.re-wrenches.org> Mac: Apparently so, but this operation is not supported. It supposedly works. William On Feb 12, 2015, at 3:18 PM, Mac Lewis <maclew...@gmail.com> wrote: Hi Jay & William, Just so I understand, you can put the mate into auto right after the eq is enabled (not after eq has finished), and it will manage the generator? Is that right? Thanks On Thu, Feb 12, 2015 at 10:45 AM, jay peltz <j...@asis.com> wrote: I"ve had clients do it for years with no problems that I know of. jay peltz power On Feb 12, 2015, at 9:47 AM, <will...@millersolar.com> wrote: Friends: I understood the generator had to be started and stopped manually. I have a client who was using the sequence below to stop the generator automatically. To have the generator stop automatically has a convenience factor, but I do like my clients to verify the cycle has accomplished the prescribed regimen, and walking away from the process does not accomplish that. I spoke with Outback regarding the procedure of engaging the auto mode prior to completion of the EQ and the reply was that the system had not been engineered to operate this way so the results could not be guaranteed. William From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of jay peltz Sent: Thursday, February 12, 2015 8:54 AM To: RE-wrenches Subject: Re: [RE-wrenches] Outback AGS & eq Hi Mac I don't think there is a global eq function. Eq continues to be manual on inverters. Gen to manual on Initiate EQ Gen to auto Done Jay Peltz power. _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org -- Mac Lewis "Yo solo sé que no sé nada." -Sócrates _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org _____ _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
