Yeah, 1k/2k wire shows a diameter of 0.26" on the spec sheet, or 0.053093 in^2.
Jason Szumlanski Fafco Solar On Thu, Jun 26, 2014 at 2:06 PM, Kirk <k...@vtsolar.com> wrote: > Nice calculator. RHH may be equivalent to 600 volt pv wire, but 1k/2k pv > wire is thicker. > > Kirk Herander > VSE > > On Jun 26, 2014, at 1:49 PM, Jason Szumlanski <ja...@fafcosolar.com> > wrote: > > I use this site when I need a quick answer. Use RHH (covered) with one > conductor. You get the same answer. > > http://www.electrician2.com/calculators/rf_calculator.html > > > Jason Szumlanski > > Fafco Solar > > > On Thu, Jun 26, 2014 at 1:46 PM, Jason Szumlanski <ja...@fafcosolar.com> > wrote: > >> 0.0437435 per this attached spec sheet for 600V. >> >> >> Jason Szumlanski >> >> >> On Thu, Jun 26, 2014 at 1:15 PM, Kirk <k...@vtsolar.com> wrote: >> >>> Hi folks, >>> What is the proper approximate in2 area to use for #10 1kva/2kva pv >>> wire for calculating conduit fill? I'm on a job site and don't have the >>> specs with me. Thanks. >>> >>> Kirk Herander >>> VSE >>> >>> >> > ___ > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
