That is a dedicated OCPD for each inverter. Miller Solar
> On Jun 25, 2014, at 7:17 PM, William Miller <[email protected]> wrote: > > Not allowed. You need a dedicated OCPD. Plus seems like a really bad idea. > How do you shut down just one inverter? > > > > Miller Solar > >> On Jun 25, 2014, at 6:19 PM, Corey Shalanski <[email protected]> >> wrote: >> >> I am curious about best practices for combining the output of multiple >> inverters: >> We are considering using an insulated tap "Polaris/Burndy" connector in lieu >> of a solar accumulation panel. We would then run the output of this tap >> connector through a fused disconnect and on to the interconnection. Does >> anyone else do this? >> In the above scenario, how should we size the wire between each inverter's >> output and the tap connector? Since there is no OCPD on this wire, would we >> have to use the same wire gauge as the combined output? or can we get away >> with sizing each wire according to its associated inverter output rating? >> -- >> Corey Shalanski >> Joule Energy >> New Orleans, LA >> ᐧ >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: [email protected] >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://www.mail-archive.com/[email protected]/maillist.html >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> www.members.re-wrenches.org > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
