Jerry: The gen is powering the loads through a bypass breaker so we can't be stopping and starting it. We did simulate an inverter start by initiating a start signal and immediately closing the gen feed breaker. This eliminated a sync error but did not allow the gen to charge.
WM Miller Solar > On May 4, 2014, at 7:41 PM, Jerry Shafer <[email protected]> wrote: > > Charger set to on bit the max amps to 0 or volt setting to high. Isis you use > the inverter to turn on the genny or did you just start it up because it may > not connect if it did not request it that has happened to my customers. Go > into the gen menu and try from there. > >> On May 4, 2014 7:25 PM, "William Miller" <[email protected]> wrote: >> Jerry: >> >> Your answer was pretty vague. What kind of mid-wire or programming error? >> >> William >> >> Miller Solar >> >>> On May 4, 2014, at 7:08 PM, Jerry Shafer <[email protected]> wrote: >>> >>> Sorry, Programming or mis wire is where i would put my money. >>> >>>> On May 3, 2014 1:07 PM, <[email protected]> wrote: >>>> Friends: >>>> >>>> >>>> >>>> We commissioned a new SI6048 3 phase system yesterday. It will create >>>> power but it won’t charge from the generator. This is a generator that >>>> was working with a 3 SI4548 system. We checked rotation and volts and >>>> hertz. We checked inverter programming. All seems correct. There is no >>>> phone service so using tech support is cumbersome. >>>> >>>> >>>> >>>> Has anyone experienced this problem before? >>>> >>>> >>>> >>>> Thanks! >>>> >>>> >>>> >>>> William >>>> >>>> >>>> >>>> >>>> >>>> <image003.jpg> >>>> Lic 773985 >>>> millersolar.com >>>> 805-438-5600 >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> List sponsored by Home Power magazine >>>> >>>> List Address: [email protected] >>>> >>>> Change email address & settings: >>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>>> >>>> List-Archive: >>>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >>>> >>>> List rules & etiquette: >>>> www.re-wrenches.org/etiquette.htm >>>> >>>> Check out participant bios: >>>> www.members.re-wrenches.org >>> _______________________________________________ >>> List sponsored by Home Power magazine >>> >>> List Address: [email protected] >>> >>> Change email address & settings: >>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>> >>> List-Archive: >>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >>> >>> List rules & etiquette: >>> www.re-wrenches.org/etiquette.htm >>> >>> Check out participant bios: >>> www.members.re-wrenches.org >> >> _______________________________________________ >> List sponsored by Home Power magazine >> >> List Address: [email protected] >> >> Change email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out participant bios: >> www.members.re-wrenches.org > _______________________________________________ > List sponsored by Home Power magazine > > List Address: [email protected] > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
