We have used vented cabinets with doors opening to the front. everything is inside have had them inplace for several years On Apr 30, 2014 1:39 AM, "Allen Frishman" <amfr...@aeonsolar.com> wrote:
> Benn, > micro inverters are an option although there is no shade issues on this > project so I would like to keep the inverter cost down. What I mean by > zero lot is that the building is connected to the buildings on both sides, > there is no back yard space and the front wall is exposed to the street so > hanging inverters on an outside wall is not an option. Thanks for the > feedback - I just might go with the micro inverters. > > > *Al Frishman* > AeonSolar > > *(917) 699-6641 <%28917%29%20699-6641> - cell* > *(888) 460-2867 <%28888%29%20460-2867>* > *www.aeonsolar.com <http://www.aeonsolar.com/>* > > On Apr 29, 2014, at 6:26 PM, Benn Kilburn wrote: > > Al, > Not sure what you mean by "zero lot building"? > Can you design/construct a ballasted "wall/structure" at the back of the > array that could accommodate the inverters and load center on its > 'out-of-the-sun' side. It could be a covered/vented cabinet. > Are micro-inverters an option? That would make it easier to > design/construct such a wall. > > Benn > > > On Tue, Apr 29, 2014 at 4:14 PM, Allen Frishman <amfr...@aeonsolar.com>wrote: > >> Hey Wrenchers, >> I am looking for suggestions for building a shade structure on a flat >> roof for inverters and load center. There is no bulk heads on this flat >> roof and it is a zero lot building so there is no exterior wall available >> to hang the inverters. No space inside the building either so the roof is >> the only option. Any suggestions? I will be using a ballast racking >> system so the array will not provide any shade. >> >> All ideas welcome and appreciated! >> >> *Al Frishman* >> AeonSolar >> >> *(917) 699-6641 <%28917%29%20699-6641> - cell* >> *(888) 460-2867 <%28888%29%20460-2867>* >> *www.aeonsolar.com <http://www.aeonsolar.com/>* >> >> >> _______________________________________________ >> List sponsored by Home Power magazine >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out participant bios: >> www.members.re-wrenches.org >> >> >> > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
