Benn, micro inverters are an option although there is no shade issues on this project so I would like to keep the inverter cost down. What I mean by zero lot is that the building is connected to the buildings on both sides, there is no back yard space and the front wall is exposed to the street so hanging inverters on an outside wall is not an option. Thanks for the feedback - I just might go with the micro inverters.
Al Frishman AeonSolar (917) 699-6641 - cell (888) 460-2867 www.aeonsolar.com On Apr 29, 2014, at 6:26 PM, Benn Kilburn wrote: > Al, > Not sure what you mean by "zero lot building"? > Can you design/construct a ballasted "wall/structure" at the back of the > array that could accommodate the inverters and load center on its > 'out-of-the-sun' side. It could be a covered/vented cabinet. > Are micro-inverters an option? That would make it easier to > design/construct such a wall. > > Benn > > > On Tue, Apr 29, 2014 at 4:14 PM, Allen Frishman <amfr...@aeonsolar.com> wrote: > Hey Wrenchers, > I am looking for suggestions for building a shade structure on a flat roof > for inverters and load center. There is no bulk heads on this flat roof > and it is a zero lot building so there is no exterior wall available to hang > the inverters. No space inside the building either so the roof is the only > option. Any suggestions? I will be using a ballast racking system so the > array will not provide any shade. > > All ideas welcome and appreciated! > Al Frishman > AeonSolar > > (917) 699-6641 - cell > (888) 460-2867 > www.aeonsolar.com > > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
