1/4" stainless steel pop rivets are pretty effective. Cost about $1 each and the tool is about $100. Useful for other large rivets as well. You would need a grinder to get them off. Bob-O
On Oct 24, 2013, at 1:37 PM, William Dorsett wrote: We’ve got a system to go up in the student ghetto in the middle of town, so of course we got drunks and little pirates. Height has always been a solution but requires a lot beefier (pronounced “expensive”) support pipes. What security measures does everyone recommend of a system that is low enough to unbolt? Thanks all. <image002.jpg> <Bill Dorsett.vcf>_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
