Friends:
I have just two micro-hydro clients, too few to have dedicated as much time
as I should to educate myself. I appreciate any help on these questions:
I need to rework a diversion control system.
1. I am going to use a mercury wetted relay driven by the Aux relay in an
FX inverter set to actuate on high battery to connect the DC Bus to the
diversion load. Sound OK?
2. Can I connect the hydro to the DC Bus (via a diode) using a breaker? I
need OCP but I don't want anyone to disconnect the breaker and risk over
speeding the water wheel. I could label the breaker "Do not open." I have
been using a fuse, but if it opens, it is likely to remain undetected for a
longer time.
Thank in advance.
William Miller
Miller Solar
Voice :805-438-5600
email: will...@millersolar.com
http://millersolar.com
License No. C-10-773985
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
