I too like the big single cells. I have used many of the Deka 1360 AH 2 volt cells with good results over the years. All as a single string with welded interconnects. The welding is an art but kinda fun to do.
Want to clear out the owner, just light the torch! I have had bad luck with the Deka L-16's in the same locations as Trojan L-16's most failed around 3 years. The D series 2 volts are different, and weigh around 230# or so. You can get them in the taller cases to have more room for electrolyte to reduce watering frequency. They are my single cell of choice at this point. What I don't like about the Trojan L-16 2 volt is the separate cells, all the caps to pull to check and fill, how about a connecting hole to let the electrolyte travel between the cells, would it be that hard? I have no doubt L-16 2 volt with the factory welded connections will outlast an L-16 6 volt Good day, Bob Ellison From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Dan Fink Sent: Monday, October 08, 2012 3:29 PM To: RE-wrenches Subject: Re: [RE-wrenches] Trojan 2 volt L-16s Tom, big cells are really the way to go, rather than too many parallel battery bank connections. That is for darned sure, Methinks the issue is delivery weight. Was considering a back-of-pickup-truck winch arm thing here not too many years back, and then it all flashed before my eyes.......this SUCKS. We could possibly subcontract the delivery and lifting of 300-400lb plastic-encased chunks of lead and acid, but otherwise I have no desire to enter the health of my back into the equation. Those big heavy batteries sure do work good, though, and last a long time. -- Dan Fink, Executive Director; Otherpower Buckville Energy Consulting Buckville Publications LLC NABCEP / IREC accredited Continuing Education Providers 970.672.4342 (voicemail) On Mon, Oct 8, 2012 at 1:08 PM, Tom Duffy <t...@thesolar.biz> wrote: William I have wondered about this as well, why don't they just make a big 1110 AH cell? Which as you point out would be less caps to feed and less chance of cell imbalance as well. I do like 2V cells over 6V but this question bothers me. Tom Duffy -----Original Message----- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of William Miller Sent: Monday, October 08, 2012 1:59 PM To: RE-wrenches Subject: [RE-wrenches] Trojan 2 volt L-16s Friends: Has anyone used the Trojan 2 volt L-16 batteries? They each have 3 cells, I presume in parallel. The question presents: Although you can divide the strings by three, there are still an equal number of batteries and cells to maintain and to get out of whack. Will these batteries be equally likely or less likely to have cell imbalances in the future? The only benefit I see is a reduction in string wiring jumpers. Comments? Thanks in advance. William Miller
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
