No burn marks on the frames, modules or poles.

Jeff
Hudson Solar

From: re-wrenches-boun...@lists.re-wrenches.org 
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of jay peltz
Sent: Friday, September 07, 2012 12:59 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] Extensive Lightning Damage to Modules

My 2 cents here is that this is flash irradiance damage.

As there appear to be no "burn" marks on the module frames right?


Jay
peltz power


On Sep 7, 2012, at 9:29 AM, 
<d...@foxfire-energy.com<mailto:d...@foxfire-energy.com>> wrote:


I've seen it twice. both were DP&W pole Mounts. the first time the whole array 
was involved (this was a few years ago). At the time, we thought it might be a 
disgruntled employee because no one had ever heard of such damage. I think we 
used box lugs and star washers on each module back then). the second just a few 
weeks ago. this time it seemed totally random affecting about 30% in different 
strings. Seems back in the broadcast industry we viewed lightening strikes as 
"Acts of God", and focused more on repair than the "whys". We install as per 
manufacturer's spec and NEC, and cross our fingers.. But when the Good Lord 
comes knocking, all bets are off. I remember pulling onto a job site once and 
found 80 lb chunks of chimney/ fireplace some 150ft down the driveway. Yes, the 
house did have lightening rods. Good Luck. db


Dan Brown
Foxfire Energy Corp.
Renewable Energy Systems
(802)-483-2564
www.Foxfire-Energy.com<http://www.Foxfire-Energy.com/>
NABCEP #092907-44



--
This message has been scanned for viruses and
dangerous content by Hudson Valley Computer 
Services<http://www.hvcomputerservices.com/>, and is
believed to be clean.
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to