And if used with rails, helps with lowering module temperature (increasing
distance from roof) as well as discouraging rodent nesting (again the
further away from the roof deck the modules is, the less likely nesting is
to occur) in my experience.

 

-Glenn

 

From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Jason
Szumlanski
Sent: Monday, August 20, 2012 11:27 AM
To: RE-wrenches
Subject: Re: [RE-wrenches] S5! question

 

I agree - the regular S-5! clamps with L-Feet and rails adds a lot of
flexibility. Plus, it is compatible with microinverter installations.


Jason Szumlanski

Fafco Solar

 

 

On Mon, Aug 20, 2012 at 10:56 AM, Solarguy <nt...@1scom.net> wrote:

The S-5 Kit must be adjusted with the jam nuts potentially at every clamp
location to keep the modules from being forced to follow the roof contour.
We have always used L-feet and rails mounted to the standard S-5 clamps
since it creates a flat surface for the pv. 

 

Jim Duncan

North Texas Renewable Energy Inc

www.ntrei.com <http://www.ntrei.com/>  

NABCEP PV 031310-57

TECL-27398

nt...@1scom.net 

817.917.0527

 

 

-----Original Message-----
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of jay peltz
Sent: Monday, August 20, 2012 9:17 AM
To: RE-wrenches
Subject: [RE-wrenches] S5! question

 

Hi All,

 

I'm doing a S5! PV kit install for the first time.

 

Any tips, advice ?

 

thanks,

 

jay

 

Peltz Power

 


_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org



 

_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to