The KC120's turned out to be faulty. Kyocera replaced all 12 of the bad KC120's
with refurbished KC120's and requested an invoice for my labor to complete the
exchange. I tested the new and old modules side by side and both registered the
same voltage and amperage. It's only under load when the power failure is
apparent. This is why I initially ruled out the modules as being the problem.
Thanks for all your help wrenchers!
Eric Stikes
Owner
SunHarvest Solar
+1 (530) 798 - 3738
www.harvesthesun.com
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
