Hello Wrenches, I had a request from a local alarm company for a small PV - Battery system to power an alarm communicator system. The parameters given are as follows
12 V DC power supply to the gear standby load 28 mA - this is the majority of the time Operation peak load 2A for 2 minutes - once per day for communications check and as required for alarm condition report Have any of you provided such a system and if so could you share your recommendations for a cost effective solution. With Regards Carl Adams SunRock Solar _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
