IMHO no one makes a better inverter than Exceltec. However, in these large
stacks the idle current can really add up under low to no loads. You should
look at average draw and do the quick math to see if it makes sense as you'll
need to add additional generation to offset this. To my knowledge they are not
"cascading slaves" like Outback does. Please correct me if I'm mistaken Dan.
BTW - Outback is limited to only 3 inverters for 10.8kW in a 3 phase stack and
you'll needs lots of dedicated distribution circuits, not one main panel.
>From the Solar, Wind and Hydro powered office of Jeff Oldham/Regenerative
>SOLutions
____________________________________________________________
Penny Stock Jumping 3000%
Sign up to the #1 voted penny stock newsletter for free today!
http://thirdpartyoffers.juno.com/TGL3131/4ea73ffca08d4e04d03st05vuc
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
