Hi Jason, How about a standard 60a 2 pole mechanical transfer switch?
jay peltz power On May 16, 2011, at 1:34 PM, Jason Szumlanski wrote: > I am looking for an external output bypass assembly for a Xantrex 3 x > XW4024 system. My customer wants to be able to completely bypass the > inverter output and operate loads straight from the grid - similar to > what can be done in an Outback FlexWare system with their I/O bypass > assemblies. > > This customer just wants the option of running loads direct from > utility. It has nothing to do with the inverter input side. > > Any off-the-shelf solutions out there? > > Jason Szumlanski > Fafco Solar > > > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
