Hi does anyone know what the TED current transformer voltage is? I am quiting
my TED attempts and going over to Egauge, does anyone know is the TED based on
0.333 volts full scale? I have asked them three times and they never answer.
I
was hoping to salvage the CTs and use on Egauge.
Thank you
Darryl
________________________________
From: Jesse Dahl <dahlso...@gmail.com>
To: "RE-wrenches@lists.re-wrenches.org" <RE-wrenches@lists.re-wrenches.org>
Sent: Sat, May 7, 2011 7:21:43 PM
Subject: [RE-wrenches] Working on metal roofs.
Wrenches,
I will be installing multiple arrays on metal roofs at a local community
college
and am wondering about tying off. Most of the work will be done off of
scaffold
and JLGs, but there will be times I will have to access upper portions of the
roof. I am looking at two arrays that will be installed on standing seam roofs
both with a 12/12 pitch.
How have people been working safely on roofs like this?
As always, I really appreciate all the help.
Jesse
Sent from my iPad!!!
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
