I would have gone with the Outback inverter and let the solar and wind turbine put power into the grid via the outback.
DT ________________________________ From: Drake <drake.chamber...@redwoodalliance.org> To: RE-wrenches <re-wrenches@lists.re-wrenches.org> Sent: Thu, May 5, 2011 4:59:22 PM Subject: Re: [RE-wrenches] Interfacing an Air 403 wind generator Are these holding up any better than in the past? At 05:46 PM 5/5/2011, you wrote: I'm with Bob-o on this one. I suspect if they had any indicator of the power it actually produced, they would be less in love with it. > >Chris Daum >Oasis Montana Inc. > >________________________________ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Bob-O Schultze >Sent: Thursday, May 05, 2011 3:13 PM >To: RE-wrenches >Subject: SPAM-LOW: Re: [RE-wrenches] Interfacing an Air 403 wind generator > >Give it a resistor to work against and call it Kinetic Yard Art. Not worth >much >else... > > >On May 5, 2011, at 11:15 AM, Peter Talmage wrote: > >Hi Dana, > >The battery and all associated equipment is being totally removed as the folks >are now unable to do the required maintenance. They really love the little Air >403 and would like to interface it if at all possible even if it doesn't make >economical sense. > >Peter > >--- On Thu, 5/5/11, Dana <d...@solarwork.com> wrote: > > > >From: Dana <d...@solarwork.com> > >Subject: [RE-wrenches] Interfacing an Air 403 wind generator > >To: "'RE-wrenches'" <re-wrenches@lists.re-wrenches.org> > >Date: Thursday, May 5, 2011, 1:32 PM > > >The Air is DC, wouldn’t it just feed the battery bank and there for less from >the PV to the battery bank and therefore more PV to go to the grid tie……… > > > > > >It is a mighty small unit to go to the effort to grid tie unless he has a >18MPH+ >yearly wind speed. If he has that much wind go for a SWWP - Skystream wind >turbine that is UL listed for grid tie. > > > > > >Dana Orzel > > >Great Solar Works, Inc > > >E - d...@solarwork.com > > >V - 970.626.5253 > > >F - 970.626.4140 > > >C - 970.209.4076 > > >web - www.solarwork.com > > > > > >"Responsible Technologies for Responsible People since 1988" > > >Do not ever believe anything, but seriously trust through action. > > > > > >From: re-wrenches-boun...@lists.re-wrenches.org >[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Peter Talmage > >Sent: Thursday, May 05, 2011 11:26 AM > >To: RE-wrenches > >Subject: [RE-wrenches] Interfacing an Air 403 wind generator > > > > > >I have a client with an independent power system who is going utility >interfaced. We are putting the 24 volt arrays on Ephase inverters. He wants >the >Air 403 to be interfaced as well. Has anyone done this and if so, how ? Thanks > > >Peter Talmage, P.E. > > >Energy and Design > > > > > >-----Inline Attachment Follows----- > > >_______________________________________________ > >List sponsored by Home Power magazine > > >List Address: RE-wrenches@lists.re-wrenches.org > > >Options & settings: > >http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > >List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > >List rules & etiquette: > >www.re-wrenches.org/etiquette.htm > > >Check out participant bios: > >www.members.re-wrenches.org > >_______________________________________________ >List sponsored by Home Power magazine > >List Address: RE-wrenches@lists.re-wrenches.org > >Options & settings: >http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > >List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > >List rules & etiquette: >www.re-wrenches.org/etiquette.htm > >Check out participant bios: >www.members.re-wrenches.org > > >_______________________________________________ >List sponsored by Home Power magazine > >List Address: RE-wrenches@lists.re-wrenches.org > >Options & settings: >http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > >List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > >List rules & etiquette: >www.re-wrenches.org/etiquette.htm > >Check out participant bios: >www.members.re-wrenches.org Drake Chamberlin ATHENS ELECTRIC OH License 44810 CO license 3773 NABCEP Certified PV
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
