Nick
A middle solution is to use the Mac and get VMWare Fusion and put Windows 7 or
XP on it.
You can try it for free and then get it for $79.
Best of both worlds on one machine. This is what I've been doing since '08.
Aloha,
Keith
________________________________
From: Nick Soleil <nicksoleilso...@yahoo.com>
To: re-wrenches@lists.re-wrenches.org
Sent: Friday, April 8, 2011 1:55 PM
Subject: [RE-wrenches] SLDs with Mac
Hello Mac Users:
I have been using Visio Professional for my Single Line Diagrams, but am
considering a change to Mac. Can I open or edit Visio diagrams with any Mac
applications? Probably not. What programs are available for generating
electrical diagrams? Have you used OmniGraffle? It seems really user
friendly.
What about AutoCAD for Mac?
Nick Soleil
707-321-2937
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
