Nick, you can still use Visio/AutoCAD on the Mac if you install
Parallels or VMWare, which allow you to run Windows programs. Either of
those would run you about $80, which is cheaper than OmniGraffle. Each
of these three software packages have trial versions so you can check
them out before you commit.
On 2011/4/8 7:55 PM, Nick Soleil wrote:
Hello Mac Users:
I have been using Visio Professional for my Single Line Diagrams, but am
considering a change to Mac. Can I open or edit Visio diagrams with any
Mac applications? Probably not. What programs are available for
generating electrical diagrams? Have you used OmniGraffle? It seems
really user friendly.
What about AutoCAD for Mac?
Nick Soleil
707-321-2937
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options& settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules& etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
