Hi Bob,
I believe it's about 30 watts. Can't you just leave it in "search"
mode? That will use considerably less power...
Daryl
> Can anyone tell me the standby power draw on a
>
> Xantrex SW 4048 plus?
>
> I am betting it's 25 to 50 watts just sitting there doing nothing, all
> this inverter does is idle to start the generator when needed, no AC
> output is used.
>
> I seem to be unable to download the manual from any of the web sites.
>
> Thanks,
> Bob Ellison
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
