Also be careful w/high standoffs (keep the rail as close to the S-5! as
possible) or that "long" lever will rock the S-5! and loosen it on the seam
forcing a lot of back and forth to re-tightening set screws. A torque wrench
properly set will also be helpful in preventing this. It is indeed easier
w/rails but sure looks a lot better w/o them! Good luck!-jeff From the Solar,
Wind and Hydro powered office of Jeff Oldham/Regenerative SOLutions
____________________________________________________________
Brooks
LOVE IT. SHOOT IT. LIVE IT. Â Learn how! Â
http://thirdpartyoffers.juno.com/TGL3131/4d5ec427935ed3366c9st03vuc
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
