One downside of standing seams is that they are rarely square with the plane of the roof. The higher the array the greater the slope on the module mounting surface. Plan on a little elbow grease to straighten the ribs once S5. & rails are in place. Jim Duncan
Sent from my Verizon Wireless BlackBerry -----Original Message----- From: August Goers <[email protected]> Sender: [email protected] Date: Fri, 18 Feb 2011 07:05:29 To: RE-wrenches<[email protected]> Reply-To: RE-wrenches <[email protected]> Subject: Re: [RE-wrenches] Seam clamps with or w/o rails _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
