I use Maverick's ferrule method. I buy #10 uninsulated barrel connectors and crimp them on my 10AWG conductors. Good Luck, bob-O
On Feb 9, 2011, at 4:23 PM, Carl Adams wrote: Wrenches, We often use a conventional 100A meter base and analog meter as an independent metering system for inverter output. These meters typically have a minimum conductor size of #6 AWG. For smaller systems the inverter output conductors are smaller than #6 AWG. We have upsized the conductors to match the meter base requirement, but this adds expense. I am looking for other suggestions for resolving this. With Regards Carl Adams SunRock Solar _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
