I have yet to find one RV that is even close to NEC. The company popup camper 
trips GFI breakers every time we try to plug into an outlet.  I have yet to 
discover what or how many appliances there are that are causing this issue.

 

Dana Orzel

Great Solar Works, Inc

E - d...@solarwork.com

V - 970.626.5253

F - 970.626.4140

C - 970.209.4076

web - www.solarwork.com

 

"Responsible Technologies for Responsible People since 1988"

Do not ever believe anything, but seriously trust through action.

 

From: re-wrenches-boun...@lists.re-wrenches.org 
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Starlight 
Solar, Larry Crutcher
Sent: Wednesday, February 02, 2011 12:56 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] Parallel wire runs to increase size

 

Dan and others, 

Thanks for the comments. The answer from Dan is what I was needing: 

"For two parallel runs of different sized conductors, add the circular mil area 
for both conductors, then using a wire table (such as a pocket guide), find the 
gauge closest to the total CMA to get the AWG equivalent."

 

Perhaps I should have explained that the PV system voltage is under 50 volts 
and that all conductors are bonded with terminal blocks at both ends. The 
current will distribute itself across the two conductors.

 

Just a side note for those concerned with the NEC and RV wiring: After years of 
wire installations in nearly every recreational vehicle made, I can assure you 
that not one RV is in total compliance with NEC. Some of the DC wiring 
performed by manufacturers is downright dangerous with long cable runs or many 
branch circuits with no circuit protection at all. Very scary. 

 

_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to