Hi Jay: I recently upgraded the software on a large XW system with 3 inverters, an MX-60, controller, and a Gen Start Module. Schneider mailed me the adapter cable, and everything worked great. You have to upgrade the software to all XW components if you are going to upgrade the AGS software. The upgrade took about 40 minutes for my 6 components. Make sure that your laptop battery is charged, because you have to turn off the inverters during the upgrade. It would be slick to bypass the utility or generator power to the site during the service. If the laptop turns off during the upgrade, it can be really bad, because it can result in having to pull the inverters off the wall and sending them back for service!) I can't believe that the original AGS software did not support 2-wire start! The wiring harness has 13 different wires for a multitude of gen start methods, but they forget the most fundamental one! How does that happen? Gen starting shouldn't be so complicated.
Nick Soleil Project Manager Advanced Alternative Energy Solutions, LLC PO Box 657 Petaluma, CA 94953 Cell: 707-321-2937 Office: 707-789-9537 Fax: 707-769-9037 ________________________________ From: jay peltz <j...@asis.com> To: RE-wrenches <re-wrenches@lists.re-wrenches.org> Sent: Thu, January 13, 2011 10:20:54 AM Subject: [RE-wrenches] XW config tool HI All, Any advice about using the XW config tool? I've got to update an AGS module and the SCP I have the tool already, really nice having to buy it. thanks in advance, jay Peltz Power _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org