|
Jay, The one time I had to use it (to upgrade a 4548 unit with old firmware) it worked fine the first time. As I'm not a software nerd, I walked through the steps with Schneider tech support on the line, and this smoothed out all the bumps. I downloaded the firmware upgrade to my laptop, took the laptop to the site, and connected the unit and followed the wizard. The support was actually very good. This was just a few weeks ago. I don't recall (or can find the email) of who I worked with, but he wasn't Nick Klein and was very software-savvy. I hope this helps you. Allan Allan Sindelar On 1/13/2011 11:20 AM, jay peltz wrote: HI All, Any advice about using the XW config tool?I've got to update an AGS module and the SCP I have the tool already, really nice having to buy it. thanks in advance, jay Peltz Power _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org |
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
