To be honest, I cannot think of any reason ever to replace the electrolyte in a 
battery except to replace spillage. If the batteries got to the slush or 
freezing point at less than –10F or so, they probably already had problems with 
charging.

From: jay peltz 
Sent: Wednesday, December 29, 2010 1:24 PM
To: RE-wrenches 
Subject: Re: [RE-wrenches] Trace inverters undercharging batteries.

Hi Jamie, 



Would slushy electrolyte be an problem for a battery?
Would this call for replacing the electrolyte?

thanks,

jay

peltz power


On Dec 29, 2010, at 8:28 AM, James Surrette wrote:


  Hi Jay, 

  If the froze and it was "slushy" will not cause internal damage. 

  To your point, if they freeze solid - this will generally break the grid and 
cause internal shorts. 

  I assumed, since the batteries were operational, there is no shorts. 

  Per freezing, here is the chart on freezing points and SG levels; 

  1.280 -92° F (-69° C) 
  1.265 -72.3° F (-57° C) 
  1.250 -62° F (-52° C) 
  1.200 -16° F (-27° C) 
  1.150 +5° F (-15° C) 
  1.100 +19° F (-7.2° C) 

  Regards, 

  Jamie

  >>> jay peltz <j...@asis.com> 12/29/2010 12:16 PM >>>
  I'd like to go back to the freezing battery part as I don't live in real 
freezing territory. 

  How could they actually freeze and not destroy the housing, internal plate 
structure and in the end work at all? 

  thanks, 

  jay 






    From: re-wrenches-boun...@lists.re-wrenches.org 
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Allan Sindelar
    Sent: Wednesday, December 29, 2010 10:41 AM
    To: dahlso...@gmail.com; RE-wrenches
    Subject: Re: [RE-wrenches] Trace inverters undercharging batteries. 
    Jesse,
    Don't waste your time on those batteries; they are all toast. Don't replace 
them with the same; four strings is poor design. Read the article about 
off-grid batteries in the current Home Power, and then sell the customer a set 
of 12 (or 24; either one string or two is OK) 2V industrial cells, such as HUPs 
from Northwest Energy Storage or K-series Surrettes. Size unknown. The existing 
full bank was 1400 A/hr if the cell cases had black covers, 1600 A/hr if the 
tops are blue, to give you an idea.

    BP modules from 1998 would have most likely been 12V 75W or 85W, meaning 
900-1000 watts; too small an array for that size battery bank if the home is 
used full-time; OK for a seasonal or weekend cabin.

    Only with new batteries can you even tell what the inverters are doing. My 
hunch is that the inverters aren't at fault. However, given the poor quality of 
the original installation, they likely are set to default setpoints, which can 
charge at a very high rate (about 220A at 28.8V for two if the gennie is big 
enough) but won't get batteries full (and can't equalize them), as the default 
setpoints are too low. And I'll bet dollars to doughnuts the default setpoints 
are in place, as the inverters have been shut down sometime in the last 12 
years, losing any original programming settings.

    You might see about getting an experienced off-gridder in your frozen 
region to work with you. Maybe Darryl could consult now, then make one trip out 
to set up the system once the new batteries are in. This was the classic 
late-90s system with a later charge controller upgrade, but if you have never 
worked with this equipment, you're likely to set it up for a repeat failure 
years down the road.

    Just read Jamie's post - while his advice is spot on, of course, you need 
to decide if it's worth your while. I'd be more inclined to try his approach if 
the battery bank was three years old, not 12. That's a huge amount of time 
spent, working with acid and an unknown set of hazards, with at best the 
possibility of a few years' use. I'd suggest that unless it's your 
father-in-law's cabin, and you value the chance to hang out there for a week, 
it's not worth your time or the customer's, especially given that you 
acknowledge having little off-grid experience. 

    Allan 
    Allan Sindelar
    al...@positiveenergysolar.com
    NABCEP Certified Photovoltaic Installer
    EE98J Journeyman Electrician
    Positive Energy, Inc.
    3201 Calle Marie
    Santa Fe, New Mexico 87507
    505 424-1112
    www.positiveenergysolar.com 





  This email and its attachments have been scanned by iConnection E-Mail 
Firewall for viruses, spam, and malicious content. 

  The information transmitted in this email is intended only for the entity or 
person to which it is addressed and may contain confidential/privileged 
material. If you received this in error, please contact the sender and delete 
the material from any computer. Any review, retransmission, dissemination, or 
other use of this information by persons or entities other than the intended 
recipient is strictly prohibited. %^^% 
  _______________________________________________
  List sponsored by Home Power magazine

  List Address: RE-wrenches@lists.re-wrenches.org

  Options & settings:
  http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

  List-Archive: 
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

  List rules & etiquette:
  www.re-wrenches.org/etiquette.htm

  Check out participant bios:
  www.members.re-wrenches.org





--------------------------------------------------------------------------------
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org


Northern Arizona Wind & Sun - Electricity from the sun since 1979
--------------------------------------------------------------------
Online Solar Store
Free Solar Discussion Forum
--------------------------------------------------------------------
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to