I had so much trouble EQing with the SWs, that I just told the customers to 
bulk charge in the early AM with the genie, and then use the PV in the 
afternoon to reach EQ voltage, or temporarily set the bulk voltage higher in 
the normal SW charge mode to EQ.
We don't EQ as much as some (twice a year on avg), so it has been less of a 
problem.
Phil's trick sounds interesting, but the customer is still playing with 
settings that they shouldn't have to deal with.

R. Walters
r...@solarray.com
Solar Engineer




On Dec 22, 2010, at 11:03 PM, Phil Undercuffler wrote:

> This was one of the limitations of the SW. If you want to have an EQ where 
> the generator shuts off when its finished, you need to do a little trick. 
> Setting the cursor to EQ just means the system will perform an EQ the next 
> time the genny runs, and that might be some random time in the future. 
> Setting the cursor to EQ and manually starting the genny works sort of, but 
> somebody has to stay around and babysit the system to manually turn the genny 
> off once the charge is done. Not ideal.
> 
> If you set the cursor to EQ and then temporarily adjust the two minute start 
> voltage up to any voltage higher than actual current voltage, you'll get an 
> auto-start. Since it was started under the inverter's command, it will turn 
> off once the EQ is finished.
> 
> Once the genny's running reset the two minute start voltage back to original.
> 
> Phil Undercuffler
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 

_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to